Utvrđivanje metode rada u tehnološkim operacijama glačanja odjeće primjenom MTM sistema

Zvonko Dragčević; Dubravko Rogale

Determination of Work Method in the Technological Operations of Ironing by the Application of MTM System

Authors

Zvonko Dragčević Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
Dubravko Rogale Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia https://orcid.org/0000-0002-3104-8096

Abstract

The article describes the determination of the work method by the application of MTM system in the final operation at the work place of ironing the lapels on ladie‘s jackets. The technological operation has been divided into 6 technological operations, for which, as the result of the study of the basic motions, the possibility of the performance of coordinated (combined and/or simultaneous) motions is determined, what leads to a high degree of rational performance of the whole operation. On the basis ol the investigations the standard and the actual time has been determined (1043.1 TMU), what at the machine yield factor of 43.2 % provides an output per hour of 95.8 ladie‘s jackets.

Downloads

PDF (Hrvatski)

Published

1989-09-29

How to Cite

[1]

Dragčević, Z. and Rogale, D. 1989. Determination of Work Method in the Technological Operations of Ironing by the Application of MTM System. Tekstil. 38, 9 (Sep. 1989), 523–529.