The Importance of Geometric Measurements of Spinnaret Holes

Authors

  • Jasminka Beronja Two-year Post-secondary Technical School, Bihać, Bosnia and Hercegovina, Yugoslavia
  • Dubravka Raffaelli Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
  • Maja Andrassy Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia

Abstract

As the first elements of the overmolecular structure of the fibres during the flow of the polymer melt are performed, it is extremely important to know the exact geometric measurements, the passage and the surface condition of each hole. This study demonstrates, that by means of measuring devices (special microscopes and devices for measurement of oil pressure sinking) that the fibre manufacturers process, no complete control of the spinneret holes is possible. For this reason the method of taking castings is proposed. By the analysis of the castings the exact geometric measurements and the condition of the surface, e.g. all basic elements that exert the influence on the flow of the polymer melt can be obtained.

Downloads

Published

1989-11-30

Issue

Vol. 38 No. 11 (1989)

Section

Original scientific paper

License

Copyright (c) 1989 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Beronja, J. et al. 1989. The Importance of Geometric Measurements of Spinnaret Holes. Tekstil. 38, 11 (Nov. 1989), 649–655.

Most read articles by the same author(s)

1 2 3 4 5 > >>