Application of the Ergonomic Principles by Stressing the Worker During the Process of Sewing Clothing

Authors

  • Budimir Mijović Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia https://orcid.org/0000-0002-0129-3445
  • Blaž Knez Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia
  • Darko Ujević Faculty of Textile Technology University of Zagreb, Department of Clothing Technology, Zagreb, Croatia

Abstract

The curvature of the spine to the left and to the right as well as forward in the neck and loin parts of the body and the rotation of the back part of the body on workwomen during the process of sewing clothing were examined. A corresponding mathematical formula for these investigations is shown. The curvature values and the rotation angles of three workwomen performing various technological procedures of sewing clothing at three differently formed work places were found out. The values of curving the spine during working time, the maximum curvatures and the rotation angles at the beginning and at the end of working time were also found out.

Downloads

Published

1993-08-31

Issue

Vol. 42 No. 8 (1993)

Section

Original scientific paper

License

Copyright (c) 1993 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Mijović, B. et al. 1993. Application of the Ergonomic Principles by Stressing the Worker During the Process of Sewing Clothing. Tekstil. 42, 8 (Aug. 1993), 439–445.

Most read articles by the same author(s)

<< < 1 2 3 4 5 6 7 8 > >>