Stitch Damages in the Sewing Process of Knitwear

Authors

  • Darko Ujević Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia
  • Blaž Knez Institute of Textile and Clothing, Faculty of Technology of the University of Zagreb, Zagreb, Croatia, Yugoslavia

Abstract

The article discusses the influence of technical and technological factors on the number of stitch damages during the sewing process of knitwear. Methods for testing stitch damages on knitwear are described. The investigations of the influence of sewing needles on the damages in the sewing process of knitwear, using special sewing machine with the stitch type 406, needle fineness 75, 80 and 90 and corresponding thread fineness were carried out. The investigation were performed on cotton samples in three areas of relative humidity.

Downloads

Published

1991-10-31

Issue

Vol. 40 No. 10 (1991)

Section

Original scientific paper

License

Copyright (c) 1991 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Ujević, D. and Knez, B. 1991. Stitch Damages in the Sewing Process of Knitwear. Tekstil. 40, 10 (Oct. 1991), 465–470.

Most read articles by the same author(s)

<< < 2 3 4 5 6 7 8 > >>