Influence of the Parameters of Front Bonding on the Tenacity and Resistance of the Bond in Dry Cleaning and on the Change of Colour of the Top Cloth

Authors

  • Ivo Soljačić Faculty of Textile Technology University of Zagreb, Department for textile chemistry and material testing, Zagreb, Croatia
  • Dinko Pezelj Croatian Association of Textile Engineers, Journal »Tekstil«, Zagreb, Croatia
  • Tina Arsova Faculty of Textile Technology of the University of Zagreb, Zagreb, Croatia

Abstract

The front bonding of a non-woven interlining coated with a multivariable PES and PA thermoplastic layer was carried out on five various top cloths. The tenacity of the bond between top cloth and interlining as well as the resistance in dry cleaning were measured. The changes of colour of the top cloth appearing in the process of front bonding were examined. It was found that the change of colour is caused by a higher bonding temperature. The parameters of bonding, at which the changes of colour of the top cloth were decreased, were examined and determined. The tenacity and resistance of the bond between top cloth and interlining are satisfactory.

Downloads

Published

1993-09-30

Issue

Vol. 42 No. 9 (1993)

Section

Original scientific paper

License

Copyright (c) 1993 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Soljačić, I. et al. 1993. Influence of the Parameters of Front Bonding on the Tenacity and Resistance of the Bond in Dry Cleaning and on the Change of Colour of the Top Cloth. Tekstil. 42, 9 (Sep. 1993), 489–495.

Most read articles by the same author(s)

1 2 3 4 5 6 7 8 9 10 > >>